4 Ways Galvanized Pipe Can Save You Time and Money

by | May 16, 2023 | News

Whether you need to build a sprinkler system, construct commercial drainage lines, or set up industrial process piping, galvanized pipe and fittings can offer the right balance of value and performance. Consider how 4 way galvanized pipe connector. Other fittings can simplify your next project while staying within budget.

Malleable Iron Cross

Galvanized Pipe Fittings Are Essential Components

Galvanized pipe fittings are essential components of many plumbing, irrigation, and industrial systems. They offer durability, corrosion resistance, and versatility at an affordable cost. Here are 4 top reasons galvanized pipe and fittings like 4 way connector can be good options for your next project:

  • GI pipe, also known as hot-dipped galvanized pipe, boasts a protective zinc coating that effectively resists corrosion, enabling it to withstand exposure to harsh elements like water, soil, and chemicals for extended periods while retaining its structural integrity.
  • Compared to pricier alternatives like copper or stainless steel, galvanized pipe fittings are more cost-effective, thanks to the lower costs of raw materials used in their production, resulting in lower costs of finished products.
  • Joining galvanized pipes is easy, thanks to a variety of fittings like basic slip joint fittings, threaded connections, and 4-way connector, allowing for the creation of a complete piping system.
  • Galvanized pipes come in various diameters and schedules to cater to different applications, with 4-way connectors providing versatile routing options.

How To Realize The Galvanized Coating Of 4 Way Galvanized Pipe Fitting

Galvanized pipe fittings are widely used in various industries due to their durability and resistance to corrosion. The galvanized coating on these fittings is a crucial factor in their longevity and protection against corrosion. Here are the steps to realize the galvanized coating of galvanized pipe fittings:

  • The surface of the fittings must be clean and free of any debris, oil, or grease. The surface may be cleaned by degreasing and washing with a suitable solution.
  • The fittings are pickled in a dilute solution of hydrochloric acid to remove any rust, scale or other impurities on the surface.
  • The fittings are then immersed in a solution of ammonium chloride and zinc chloride to prepare the surface for the galvanizing process.
  • The fittings are immersed in a hot bath of molten zinc, with a temperature of around 840°F, for a specific period.
Tags :